Table of Contents
Advertisement
P8 – 1. Self Test
The NETS has a several self test features that can help you determine
if things are working correctly. However, these features should only
be used by an Dealer. Details regarding these features are located in
the NETS Service Manual available ONLY to Dealers.
P8 – 2. Print PLU List
The NETS can display or print a list of all the scale's PLUs. This can
be very helpful when you do not have the NETS Software Package or
do not have access to a computer. Whenever you are generating a
printout of the PLU list, you want to make sure that your scale is
loaded with enough labels to complete the job. The scale will print a
verification label for every PLU in the range that you specify, so it is
recommended that you use a small label format when you do this.
When you display the PLU, you cannot specify a range; therefore, you
must toggle through ALL of the PLUs or press PRINT to finish
prematurely. We recommend that you purchase the NETS Software
Package if you are going to be dealing with over 100 PLUs.
To print the PLU List:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
.
8
2
3. Make sure that the printer is loaded with enough labels. Using the
numeric keys, type the PLU number that you want the list to start from.
4.
As you type, the number will appear in the Total Price Display.
Press PRINT . Now select the last (ending) PLU number for your list.
The Unit Price Display will show the starting PLU number and the
Total Price Display will show the ending PLU number. When the scale
prints the labels, it will NOT wait for you to take them before it prints
63
Advertisement
Table of Contents
