Location & Environment; Maintenance - Adam Equipment NETS ME Price Manual

Location & Environment
This scale must be placed on a flat and stable surface. Please keep
the scale away from the direct path of ventilation equipment, strong
drafts, or direct sunlight. These air disturbances can be picked up by
the scale's sensitive weighing sensors and may cause incorrect weight
readings.
If the scale is not properly leveled, please adjust the 3 adjustable legs
at the bottom of the scale. DO NOT adjust the leg that is under the
printer and closest to the front of the scale. Adjust the height of each
of the 3 adjusting feet so that the leveling gauge indicates that the
scale is level. The leveling gauge is located to the right of the display
pole bracket on the rear of the scale. You will know that the gauge
indicates "level" when the bubble is in the center of the marked circle.
Please avoid the following hostile environments:
Temperatures exceeding -10° C to 40° C (14° F to 104° F) .
Excessive vibration or instability.
Unstable or flimsy surfaces to use the scale on.
Dusty, dirty, or excessively wet environments of any kind.
The scale should be installed in a dry and liquid free environment.
When the scale is installed in a high humidity or wet-type environment,
be sure to avoid spilling or spraying anything onto the scale. If you
must operate in this type of environment you MUST use the Spill-Proof
overlay with the NETS.
ACOM Dealer. Failure to use this item may void your warrantee.

Maintenance

This scale's exterior should be cleaned with a damp cloth or rag and a
mild soap solution. Do not spray any liquids directly onto the NETS.
Always spray any cleaning fluids onto the cloth rag you are using to
wipe the scale. Remember, NEVER to hose-down the scale. Before
doing any type of cleaning, always make sure to turn the Power Switch
off and unplug the scale from any AC outlet.
You can get this optional item from your
15