Adam Equipment NETS ME Price Manual page 55

PLU Reports explained (Receipt):
st
The 1 line contains the date of the
last time the Z# report was taken.
nd
The 2 line contains today's date.
rd
The 3 line contains the scale
number of the scale that generated
this report. The 4
report name and PLU Number. The
th
5 line contains the PLU name. The
th
6 line contains the number of total
sold item for this PLU. The 7
contains the total weight sold for this
PLU (By weight). The 8
contains the total pieces sold for this
PLU (By Count).
contains the dollar amount sold for
this PLU.
< Operator >
When you perform an Operator Report, the scale will print a report the
ones you specify. This report is an X# report because it does not clear
the sales data. Reports can print on only receipt.
To generate the Operator Report:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
6
3. Enter the Operator number you want a report for (1 to 25 or 0 for all
active Operators) and then press PRINT .
4. The scale will print the report. When the scale is done printing press
ESC ESC
you want a report for another Operator.
Below is an example of an Operator Report which is printed on receipt:
th
line contains the
th
line
th
line
th
The 9 line
in only receipt mode.
1 3
SET to return to the Initial State or, go to step 3 if
Start : DD/MM/YYYY - HH:MM
End : DD/MM/YYYY - HH:MM
SCALE : ##
X# PLU ## Total
PLU name
Item Count :
PCS Count :
Total Weight :
Total PCS :
Total Sold($):
49
###
###
####
#####
#####