Table of Contents
Advertisement
To transfer data from Scale-to-Scale:
1. Place both scales together.
2. Make sure that the Power Switch is off on both scales.
3. Connect the Scale-to-Scale cable: it does not matter which side
you plug where because both sides of the cable are identical.
4. Turn both scales on and wait for them to go to the Initial State.
5. On the scale with the data ("Source" scale):
Follow steps 1 to 3 of Entering Main Menu.
Press
6. The Source scale will beep when done.
P8– 4. PLU Temporary Price Change Setting
The NETS can be set up to allow or disallow temporary price changes
during Sales mode operations. For example, you may have a PLU
that is priced at $1.00 but you want your employees to be able to
change the price for some customers or coupons:
temporary price changes" then they will be able to change the price
during Sales mode; otherwise, they will not be able to temporarily
change the prices.
Open priced PLUs are treated differently.
PLUs that are programmed with a zero price; when these are called
up in Sales mode, their prices can be temporarily changed from zero
regardless of the PLU Temporary Price Change Setting.
To modify the PLU Temporary Price Change Setting:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
8
3. Press
1
price changes. The default setting is 1.
4. Press
ESC
State.
8
3
.
4
to allow price changes or press
to save the setting and return to the Initial
SET
.
Open priced PLUs are
65
if you "allow
to NOT allow
0
Advertisement
Table of Contents
