Safety Precautions; Set Up; Assembling Of Scale - Adam Equipment LBK-3/6a Manual

EN

3.0 SAFETY PRECAUTIONS

Caution:
Please use only the original power cord or DC adapter supplied with the scale. Other
cords or adapters may damage the scale.
Notice:
• Avoid extremes of temperature. Do not place in direct sunlight or near
air conditioning vents.
• Battery should be removed if the scale is not used for a long period of
time.
• When you turn off the scale by pressing [ON/OFF] key, the power is not
completely isolated. You should disconnect the power supply if it is not
going to be used for an extended period.
• Before operating parts marked with a
instruction manual and operate with caution to avoid hazard.
• Do not stack material on the scale when it is not in use.
• Avoid high humidity that might cause condensation, and keep away
from direct contact with water.
• Static may influence the weighing result. To reduce the static wipe the
pan and the scale with anti-static wipes.

4.0 SET UP

4.1

ASSEMBLING OF SCALE

• Put the scale on a stable and even table.
• Adjust the height of the feet to level the scale; the spirit level bubble
should be in the center of the spirit level.
• Put the pan support in place, inserting the pan support pins into the
holes on top of the scale. Place the stainless steel pan on the support.
• Don't press the scale with great force or the load cell could be
damaged.
© Adam Equipment Company 2014 5
symbol please read the
9596revD-Jul14