P3-4. Sale Message(Receipt) - Adam Equipment NETS ME Price Manual

5. Type a operator name that you wish to use for this operator. As
you type the name, you will see it displayed in the Alpha Display.
6. Press PRINT .
7. The operator name was stored and the scale automatically
moves on to the next operator number which is displayed in the
Total Price display.
8. If you wish to program the next operator name, then you can
go back to step 5; otherwise, press
9. You can go back to step 3 to specify another operator number you
may wish to edit or you can press
10. You are back in the Initial State.
P3 - 4. Sale Message (Receipt)
You can print the sale message and address or any other pertinent
information in receipt mode at the bottom of each receipt; You can type
the message. Additionally, if you wish to print the Sale message at the
bottom of receipt, you should set P5-11 Sale MSG Assignment.
To program the Sale Message:
1. Follow steps 1 to 3 of entering Main Menu.
2. Press
3
3. Enter the sale message number you wish to edit. This number
must be from 1 to 15. You will see the Sale Message number in
the Total Price Display.
4. Press PRINT .
5. Type a sale message name that you wish to use for this sale
message. As you type the name, you will see it displayed in the
Alpha Display.
3. Edit Operator
[
4
.
34
]
.
ESC
ESC ESC
SET to finish.