Adam Equipment NETS ME Price Manual page 12

The Printer Cassette is a drawer mechanism that is pulled out of the
scale in order to load new label rolls or service the printer.
The Thermal Print Head is the printing element that prints the thermal
labels. Never touch this part as it can get extremely hot during the
print cycle. From time to time you may need to clean the print head;
see Proper Operation, Maintenance section.
The Peel Sensor is used by the printer to determine if you have
removed a printed label that is sitting on the peel-off bar. If this sensor
becomes blocked, the scale will not print.
The Platter is used to place commodity items to be weighed and/or
labeled. The platter may need cleaning from time to time; however,
you must remove the platter from the scale platform whenever you
clean it.
Left Side View:
The Display Bracket is where the
display pole is attached to during
installation.
NA
The Power Switch is used to turn
the scale on or off; however, even
though the switch is in the off
position it is best to unplug the
scale whenever working on any
wiring or during installation.
The AC Cord Receptacle is where the power cord is plugged into.
NA
The Adjustable Feet can be adjusted to affect the level of the scale.
There are 3 adjustable feet and 1 fixed foot which is located under the
printer towards the front of the scale.
The Specification Plate contains scale data like capacity, serial
number, version, approval numbers, power requirements, and other
manufacturer data.
6