LABORIE Nexam Pro WPU-L4 User Manual page 52

The control panel of the wireless puller contains three LED's: for Bluetooth [1],
Status [2] and Battery [3] indication, and one membrane button [4] to unlock
the slider.
1. Bluetooth LED
2. Status LED
3. Battery LED
4.
LEDs and button wireless puller
The following table describes the LEDs.
LED Color
Bluetooth Blue blinking
Status Green on
Orange on
Red on
Battery Green on
Green blinking
Orange blinking
52
Unlock slider button
Indication
The Bluetooth catheter puller has a wireless
connection with the computer.
The puller is switched on and is functioning
well.
IPL mode and/or downloading firmware.
The puller has detected an internal failure.
Contact your LABORIE representative.
The rechargeable batteries are fully charged.
The power adapter is connected to the puller
(and charging the batteries).
The batteries are almost empty; connect the
power adapter (within five minutes).
Nexam Pro User Manual
Figure 2.40 Control panel
Chapter 2