LABORIE Nexam Pro WPU-L4 User Manual page 248

Wireless (Bluetooth) flowmeter Mk III
The flowmeter complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This device contains WML-C30 / WML-C40, with FCC-ID POOWML-C30 /
POOWML-C40.
WARNING
CAUTION
WARNING
CAUTION
CAUTION
CAUTION
CAUTION
248
Make sure the flowsensor is connected to the correct
power supply F3BT-PS before switching on (if applicable).
Do not use a power supply other than which is specified.
Doing so may cause fire leading to serious accidents.
Do not bend the power cable forcibly or place a heavy
object on the cable, because it might damage the cable
and cause fire or electric shock. If the power cable is
damaged, discontinue use and replace it immediately.
The power cable connected to the flowsensor has a
connector with locking mechanism. Do not attempt
disconnection by pulling the cable. Loosen the lock by
pressing the lever on top of the connector.
Do not drop or throw the flowsensor. Do not apply
excessive force on the flowsensor (maximum 3.5 kg) or let
things drop on the flowsensor. This can permanently
damage the flowsensor.
Avoid touching or kicking the flowsensor during an
investigation.
Do not try to remove the flowsensor top plate by pulling or
screwing the top plate.
After low-battery indication, exchange the batteries within
30 minutes.
Nexam Pro User Manual Appendix A