LABORIE Nexam Pro WPU-L4 User Manual page 166

minimum and maximum scale (when you move the mouse cursor over
the Auto scale button, it will show the time window that is used).
Manually change scale
Use the triangular buttons at the maximum or minimum scale to change the
scale manually. It is also possible to double-click on the scale value and to
enter a new value.
Heartbeat filter for EMG
A heartbeat filter can be toggled on or off for the EMG channel(s). When the
filter is on, the software calculates the minimum value over a moving time
window of 400 msec.
Heartbeat filter disabled for the EMG channel. Click to enabled.
Heartbeat filter enabled for the EMG channel. Click to disable.
Show curves
It is possible to show curves by clicking the More tab and then the
Show curves tool button. Click the General tab to return to the general
screen.
Change settings
It is possible to change the settings by clicking the More tab and then
the Edit challenge tool button. You can change the challenge time or
resting time (see § 10.5.2) or you can edit the challenge (see § 10.5.3).
Click the General Tab to return to the general screen.
Click the Start investigation button to continue.
166 Nexam Pro User Manual Chapter 10