LABORIE Nexam Pro WPU-L4 User Manual page 251

CAUTION
CAUTION
NOTE
Cleaning (general)
CAUTION
CAUTION
CAUTION
Investigations
WARNING
WARNING
Safety Information
To prevent drift, always pre-wet solid-state catheters
(sensors) according to the instruction of the
manufacturer.
Only use the accessories specified in the document
"Declaration of Compatibility for MMS accessories"
(document code: 0060-DEC-007).
For cleaning and sterilization of the catheters or
accessories (e.g., EMG needle electrodes), see the
manufacturer's instructions.
To prevent damage of the Nexam Pro measurement
system do not use thinner or similar solvents.
Do not use excessive amounts of water for cleaning the
Nexam Pro measurement system to prevent damaging the
electronics.
Never allow water to get inside the Nexam Pro modules or
any other part to prevent damage to the system.
Investigation procedures as described in the Nexam Pro
manuals do not pretend to be complete. How an
investigation is performed and how the results are
interpreted, the actual diagnosing, remains under all
circumstances the responsibility of the clinician/physician
performing the investigation. The description of investigation
proceedings is only included to serve as an example to
discuss the use of the various markers and the various
transducers to reduce risks involving wrong treatment of a
patient.
Safety can be violated if, for example, the apparatus:
• shows visible damage.
Nexam Pro User Manual 251