LABORIE Nexam Pro WPU-L4 User Manual page 204

• Enable DURR (Dynamic Urethral Resistance) channel (pressure-flow
study)
• Enter residual urine
• Confirm stop investigation
• Use puller for profile
• Puller speed/manual pull speed
• Artefact detection
• Initial values marker
Create report immediately after the investigation
When the setting Print report is set to always or optional, the report can be
created immediately after the investigation using the report configuration that
is selected in the protocol. To select the configuration, click the Reporter
button behind Print report or behind Save report to PDF. In the dialog
window, you can also edit the printer settings / PDF settings for the report. The
selected report configuration will be saved per protocol, per investigation type.
The printer and PDF settings will be saved globally for all protocols, but only
for the reports which will be created after the measurement. You can find more
information about the reporter program in the separate Reporter manual in
PDF format, which can be opened via the Manuals menu in the database
program.
Channels and connections
In the protocol, you need to set the channels for each investigation (e.g., Pves,
Pabd, Pdet) to be measured and the connections for each channel. Use the
Channels and Connections buttons to set this information. For more
information, see § 12.5.8 and § 12.5.9.
Click the Transducer button to choose the transducers used during the
investigation. In most cases just select standard pressure transducers. Only
change this setting when using user-calibrated transducers. The Catheter
button is not used for urodynamic investigations.
204 Nexam Pro User Manual Chapter 12