LABORIE Nexam Pro WPU-L4 User Manual page 187

Buttons Description
Move the catheter puller and the puller clamp in the direction
of the bladder or out of the bladder.
Insert an event marker. It is also possible to add comment
for the marker.
Insert an artefact marker (delayed marker).
Activate the pause mode.
More information can be found in § 12.3.7.
Insert position marker (standing).
Insert position marker (sitting).
Insert position marker (supine).
Zero the detrusor pressure (P ) during the pre-test and, if
det
necessary, during the measurement.
During the pre-test with the urethral sensor in the bladder,
you can use this button to equalize the urethral pressure
(P ) and the vesical pressure (P ).
ura ves
Mark spontaneous miction.
Change filling liquid.
For more information, see § 12.3.8.
Activate/deactivate tap water sound.
The sound of running tap water is played. The sound is
played until the button is clicked again.
Audio comment marker.
Online review. Half of the screen
displays the curves and markers of the measured data up to
that moment. It is possible to move the markers by clicking
and dragging.
Measurement Program Nexam Pro User Manual 187