LABORIE Nexam Pro WPU-L4 User Manual page 27

Figure 2.9 The Consumables traceability dialog box
This feature registers what catheters and infusion pump tubing (type and lot
number) have been used for each study and patient. It also will warn when
consumables are about to expire as well as ensure that single-use
consumables are not reused on other patients.
To have an unobstructed view of the graphs, you can close the Consumables
traceability dialog box at any time by clicking the close button (X) in the
upper-right corner. You can reopen it by clicking the RFID button on the
toolbar.
Scanning Consumables
The Nexam software keeps track of your inventory in a repository, which is
displayed in the Consumables traceability dialog box. It's easy to add
consumables to the repository. With the Consumables traceability dialog box
open, place the RFID tag affixed to the box containing the consumables on top
of the RFID reader; the software will read the tag's information and add the
contents of the box to the repository. You will see a notification in the Scan log
section, specifying which consumables have been scanned and added, and
you will see the newly scanned consumables in the Repository available
section.
Investigation Procedure Nexam Pro User Manual 27