Chapter 1: Product Introduction
NISE 3800E-H110
Front Panel
Antenna Hole
Line-out Mic-in
USB 2.0
(Uses USB 3.0 connectors, but PCBA
design only supports USB 2.0 signal.)
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Antenna Hole
Power
Switch
SIM
LED Indicators
Antenna Hole
The external antenna mounting holes are used to mount and connect
optional external antennas.
USB 2.0
Used to connect USB 2.0/1.1 devices. USB 3.0 connectors are used here, but
only support USB 2.0 signal due to PCBA design.
Line-out
Used to connect a headphone or a speaker.
Mic-in
Used to connect an external microphone.
SIM Card Slot
Used to install a SIM card.
LED Indicators
Indicates the COM port, LAN and GPO activity of the system. The Diagnostics
LEDs (Diag 1 and Diag 2) are used for troubleshooting system errors.
Diag 1
Normal
Boot up
No LED light
Constant LED light
POST
No LED light
Flashing LED light
Memory
OS
Power Switch
Press to power-on or power-off the system.
7
Diag 2
Fail
Normal
Fail
No LED light
Constant LED light
No LED light
Flashing LED light
NISE 3800 Series User Manual