Nexcom NISE 3800E-H110 User Manual page 91

Chapter 4: BIOS Setup
SATA And RST Configuration
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Chipset
SATA And RST Configuration
SATA Controller(s) [Enabled]
SATA Mode Selection [AHCI]
SATA(CN6) 64GB SATA Flas (64.0GB)
SATA(CN7) Empty
MSATA(CN2) Empty
M.2 Empty
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
SATA Controller(s)
Enables or disables SATA device.
SATA Mode Selection
Configures the SATA as AHCI mode.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
Copyright © 2017 NEXCOM International Co., Ltd. All Rights Reserved.
Security Configuration
Enable/Disable SATA Device.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
RTC Lock
Enables or disables bytes 38h-3Fh in the upper and lower 128-byte bank of
RTC RAM.
76
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Chipset
Security Configuration
RTC Lock [Enabled]
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
Enable will lock bytes 38h-3Fh
in the lower/upper 128-byte
bank of RTC RAM.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 3800 Series User Manual