46
Connect Devices
6.2
Connection Examples
The example connections of a passive 2- and 3-conductor HART sensor, as well
as an active 24 VDC and an active 230 VAC HART sensor, are shown
graphically below.
In summary, the following graphic shows an example of the connection view and
the circuit diagrams of the potential feed module 753-614, which is required to
connect passive 3-conductor HART sensors as well as active HART sensors, and
of the HART I/O module 753-482..
Figure 21: Connection Views and Circuit Diagrams of I/O Modules 753-614 and 753-482
Manual
Version 1.2.0
WAGO I/O System 750
753-482 2AI 4-20mA 12 Bit S.E. HART