Removing The I/O Module; Figure 9: Removing The I/O Module (Example) - WAGO 753-482 Manual

40 Mounting
5.2.2

Removing the I/O Module

Note
Remove pluggable wiring!
Before removing a 753 Series I/O Module from the node, you must first
remove the plug (pluggable wiring) from the I/O module (see section "Plug
Removal")!
1. Remove the I/O module from the node by pulling the tab.

Figure 9: Removing the I/O Module (Example)

Electrical connections for data or power jumper contacts are disconnected when
removing the I/O module.
Manual
Version 1.2.0
WAGO I/O System 750
753-482 2AI 4-20mA 12 Bit S.E. HART