Dscp Map Screen; Figure 116 Dscp Map; Table 65 Dscp Setup; Table 66 Dscp Map - ZyXEL Communications IES-1248-71 User Manual

Chapter 32 DSCP
The following table describes the labels in this screen.

Table 65 DSCP Setup

LABEL
DSCP Map
Port
Active
Select
Active
Inactive
All
None

32.3 DSCP Map Screen

Use this screen to convert DSCP priority to IEEE 802.1p priority. To open this screen, click
Advanced Application, DSCP, DSCP Map.

Figure 116 DSCP Map

The following table describes the labels in this screen.

Table 66 DSCP Map

LABEL
DSCP Map
Source DSCP
224
DESCRIPTION
Click DSCP Map to open the screen where you can set up the mapping
between source DSCP priority and IEEE 802.1p priority (see
page 224).
This field displays each port number.
This field displays whether DSCP is active ("V") or inactive ("-") on this port.
Select this, and click Active or Inactive to enable or disable the DSCP on this
port.
Click this to enable DSCP on the selected ports.
Click this to disable DSCP on the selected ports.
Click this to select all entries in the table.
Click this to un-select all entries in the table.
DESCRIPTION
Click DSCP Setup to open the screen where you can activate or deactivate
DSCP on each port (see Section 32.2 on page
This field displays each DSCP value.
Section 32.3 on
223).
IES-1248-71/73 User's Guide