Snmp Screen; Figure 126 Snmp - ZyXEL Communications IES-1248-71 User Manual

Table 75 SNMPv2 Traps (continued)
TRAP NAME
adslAtucUasLThreshTrap
adslAturSesLThreshTrap
adslAturUasLThreshTrap

37.4 SNMP Screen

To open this screen, click Advanced Application, Access Control, SNMP.

Figure 126 SNMP

The following table describes the labels in this screen.
Table 76 SNMP
LABEL
Return
Get Community
Set Community
Trap Community
Trap Destination
1~4
Port
IES-1248-71/73 User's Guide
DESCRIPTION
The number of Unavailable seconds within 15 minutes for the ATUC
has reached the threshold. currValue is the number of Unavailable
seconds that have occurred within the 15-minute interval.
The number of severely errored seconds within 15 minutes for the
ATUR has reached the threshold. currValue is the number of severely
errored seconds that have occurred within the 15-minute interval.
The number of Unavailable seconds within 15 minutes for the ATUR
has reached the threshold. currValue is the number of Unavailable
seconds that have occurred within the 15-minute interval.
DESCRIPTION
Click Return to go back to the previous screen.
Enter the get community, which is the password for the incoming Get- and
GetNext- requests from the management station.
Enter the set community, which is the password for incoming Set- requests from
the management station.
Enter the trap community, which is the password sent with each trap to the
SNMP manager.
Enter the IP address of a station to send your SNMP traps to.
Enter the port number upon which the station listens for SNMP traps.
Chapter 37 Access Control
245