ZyXEL Communications IES-1248-71 User Manual page 188

Chapter 24 MAC Filter
Table 47 MAC Filter (continued)
LABEL
Add
Cancel
Port
Mode
Active
MAC
Delete
Apply
188
DESCRIPTION
Click Add to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
These are the numbers of the ADSL ports.
Select Accept to only allow frames from MAC addresses that you specify and
block frames from other MAC addresses.
Select Deny to block frames from MAC addresses that you specify and allow
frames from other MAC addresses.
Select this check box to turn on MAC filtering for a port.
This field lists the MAC addresses that are set for this port.
Click Delete to remove a MAC address from the list.
Click Apply to save your changes to the IES-1248's volatile memory. The IES-
1248 loses these changes if it is turned off or loses power, so use the Config
Save link on the navigation panel to save your changes to the non-volatile
memory when you are done configuring.
IES-1248-71/73 User's Guide