Lineinfo Command; Figure 249 Linedata Command Example - ZyXEL Communications IES-1248-71 User Manual

The bit allocation contents are only valid when the link is up.
In the following example, the upstream channel is carried on tones 7 to 39 and the downstream
channel is carried on tones 53 to 259 (space is left between the channels to avoid interference).

Figure 249 Linedata Command Example

ras> statistics adsl linedata 1
[port 1]
up stream carrier load: number of bits per symbol(tone):
tone 0-
tone 20-
down stream carrier load: number of bits per symbol(tone):
tone 0-
tone 20-
tone 40-
tone 60-
tone 80-
tone 100- 119: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 120- 139: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 140- 159: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 160- 179: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 180- 199: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 200- 219: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 220- 239: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
tone 240- 259: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02

55.2.3 Lineinfo Command

Syntax:
ras> statistics adsl lineinfo <portlist>
where
<portlist>
This command shows the line operating values of an ADSL port.
IES-1248-71/73 User's Guide
19: 00 00 00 00 00 00 02 03 04 05 - 06 07 07 07 07 07 07 07 08 08
39: 08 08 07 08 08 07 07 06 06 05 - 04 03
19: 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00
39: 00 00 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 00 00
59: 00 00 00 00 00 00 00 00 00 00 - 00 00 00 01 01 01 01 01 01 02
79: 02 02 02 02 00 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
99: 02 02 02 02 02 02 02 02 02 02 - 02 02 02 02 02 02 02 02 02 02
You can specify a single ADSL port <1>, all ADSL ports <*> or
=
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
Chapter 55 ADSL Commands
379