ZyXEL Communications IES-1248-71 User Manual page 291

Table 92 Commands (continued)
CLASS COMMAND
acl show
dhcpsnoop disable
dhcpsnoop enable
dhcpsnoop flush
dhcpsnoop show
dscp show
dscp enable
dscp disable
dscp map show
dscp map set
vlan show
vlan portshow
vlan set
vlan enable
vlan disable
vlan delete
vlan pvid
vlan priority
vlan gvrp
vlan frametype
IES-1248-71/73 User's Guide
PARAMETERS DESCRIPTION
Show acl profile setting for a PVC
[portlist] [<vpi>
<vci>]
Disable ip spoofing for a port
< portlist >
Enable ip spoofing for a port
< portlist >
Flush DHCP snooping table for a
< portlist >
port
Displays the DHCP snooping
[portlist]
result on a port.
Displays per port DSCP setting
[portlist]
Enable ADSL/ENET ports to use
< portlist >
DSCP mapping
Disable ADSL/ENET ports to use
< portlist >
DSCP mapping
Displaying the DSCP code to
802.1p mapping table
Setting the DSCP code to 802.1p
<srccp> <mappri>
mapping table
<srccp>: source
code point, 0~63,
example:
1,3~5,10~15
<mappri> :
mapping priority,
0~7
Displays VLAN settings.
<vlanlist>
Displays the port(s) VLAN
[portlist]
settings.
Configures a VLAN entry.
<vid>
<portlist>:<F<T|U>
|X|N> [<portlist>:
<F<T|U>|X|N> ...]
[name]
Turns on a VLAN entry.
<vid>
Turns off a VLAN entry.
<vid>
Removes a VLAN entry.
<vlanlist>
Sets the PVID (Port VLAN ID)
<portlist> <pvid>
assigned to untagged frames or
priority frames (0 VID) received on
this port(s).
Sets a port's default IEEE 802.1p
<portlist>
priority.
<priority>
Set the port(s) to enable or
<portlist>
disable gvrp.
<enable|disable>
Sets the specified DSL port to
<portlist>
accept tagged, untagged or
<all|tag>
Ethernet frames (or both).
Note: enet1, enet2 are fixed at
'all'.
Chapter 44 Commands
P
L/L
M/H
M/H
M/H
L/L
L/L
M/H
M/H
L/L
M/H
M/L
M/L
H/H
H/H
H/H
H/H
H/H
H/H
H/H
H/H
291