ZyXEL Communications IES-1248-71 User Manual page 288

Chapter 44 Commands
Table 92 Commands (continued)
CLASS COMMAND
igmpsnoop mvlan
delete
igmpsnoop mvlan
group set
igmpsnoop mvlan
group delete
igmpsnoop mvlan
group show
igmpfilter set
igmpfilter show
igmpfilter profile
set
igmpfilter profile
delete
igmpfilter profile
show
queuemap show
queuemap set
garptimer show
garptimer join
garptimer leave
garptimer leaveall
rstp show
rstp enable
rstp disable
rstp priority
rstp hellotime
rstp maxage
rstp fwdelay
rstp port show
rstp port enable
rstp port disable
288
PARAMETERS DESCRIPTION
Removes a MVLAN entry.
<vlanlist>
Create a multicast to VLAN
<vid> <index>
translation entry.
<start_mcast_ip>
up to 16 entries
<end_mcast_ip>
<index>: 1~16,
Note: IP address in each entry
should be disjointed
Delete a multicast to VLAN
<vid> <index>
translation entry.
Show a multicast to VLAN
<vlanlist>
translation entry.
Sets an ADSL port(s) to use an
<portlist> <name>
IGMP filter profile.
Displays which IGMP filter profile
[portlist]
an ADSL port(s) is using.
Configures an IGMP filter profile.
<name> <index>
<startip> <endip>
Removes an IGMP filter profile.
<name>
Displays an IGMP filter profile's
[name]
settings.
Displays the system's priority level
to physical queue mapping.
Maps a priority level to a physical
<priority> <queue
queue.
level>
Display the system's garp
settings.
Set system's garp join time.
<join msec>
Set system's garp leave time.
<leave msec>
Set system's garp leaveall time.
<leaveall msec>
Display the system's rstp settings. M/L
Turn system's rstp on.
Turn system's rstp off.
Set system rstp's priority.
<priority>
Set system rstp's hello time.
<hellotime sec>
Set system rstp's max age.
<maxage sec>
Set system rstp's forward delay
<fwdelay sec>
time.
Display enet port rstp status.
Set enet port to enable rstp.
<portlist>
Set enet port to disable rstp.
<portlist>
P
H/H
H/H
H/H
M/L
H/H
M/L
H/H
H/H
M/L
M/L
H/H
M/L
H/H
H/H
H/H
H/H
H/H
H/H
H/H
H/H
H/H
M/L
H/H
H/H
IES-1248-71/73 User's Guide