Adsl Downstream Carrier1 Command; Figure 239 Adsl Downstream Carrier0 Command Display Example; Figure 240 Adsl Downstream Carrier0 Command Example 2; Figure 241 Adsl Downstream Carrier1 Command Example 1 - ZyXEL Communications IES-1248-71 User Manual

Chapter 55 ADSL Commands
The following example displays the results.

Figure 239 ADSL Downstream Carrier0 Command Display Example

ras> adsl dscarrier0 5
port
---- |--------|--------|--------|--------|--------|--------|--------|
5
Tone:
m1:32-63, m2:64-95, m3:96-127, m4:128-159
m5:160-191, m6:192-223, m7:224-255
This example disables downstream carrier tones 70 and 71 for ADSL port 5.

Figure 240 ADSL Downstream Carrier0 Command Example 2

ras> adsl dscarrier0 5 0 03000000 0 0 0 0 0

55.1.15 ADSL Downstream Carrier1 Command

Syntax:
ras> adsl dscarrier1 <port number> [<m0> <m1> <m2> <m3> <m4> <m5> <m6> <m7>]
where
<m0> - <m7>
<m0>
<m1>
<m2>
<m3>
<m4>
<m5>
<m6>
<m7>
The hexadecimal digit is converted to binary and a '1' masks (disables) the corresponding tone.
Disabling a carrier tone turns it off so the system does not send data on it.
This command displays or sets masks for downstream carrier tones from 256 to 511 on the
specified ADSL2+ port(s). Use this command to have the system not use an ADSL line's tones
that are known to have a high noise level.
The following example disables downstream carrier tone 307 for ADSL2+ port 5.

Figure 241 ADSL Downstream Carrier1 Command Example 1

ras> adsl dscarrier1 5 0 00001000 0 0 0 0 0 0
374
m1 m2
00000000 01000000 00000000 00000000 00000000 00000000 00000000
The downstream carrier tones to be masked (disabled). Each
=
<mx> can use up to 8 hexadecimal digits (0~ffffffff). Each
<mx> represents 32 carrier tones (each hexadecimal digit
represents 4 tones).
tones 256~287
=
tones 288~319
=
tones 320~351
=
tones 352~383
=
tones 384~415
=
tones 416~447
=
tones 448~479
=
tones 480~511
=
ds carrier
m3 m4 m5 m6 m7
IES-1248-71/73 User's Guide