Ppvc Member Delete Command; Figure 269 Ppvc Member Set Command Example - ZyXEL Communications IES-1248-71 User Manual

Chapter 56 Virtual Channel Management
where
<portlist>
<vpi>
<vci>
<member vpi>
<member vci>
DS vcprofile
[,US
vcprofile]>
<level>
This command adds a member PVC to a PPVC. You must create the PPVC before you use this
command to add a member.
Only the member PVCs need to be created on the subscriber's device.
The following example adds a PVC to a PPVC with VPI 8 and VCI 35 for port 5. The PVC
uses VPI 8 and VCI 36. It sets the DEFVAL profile for downstream traffic shaping and for
upstream traffic policing. It uses priority queue 2.

Figure 269 PPVC Member Set Command Example

ras> adsl ppvc member set 5 8 35 8 36 DEFVAL,DEFVAL 2

56.5 PPVC Member Delete Command

Syntax:
ras> adsl ppvc member delete <portlist> <vpi> <vci> <member vpi> <member
vci>
400
The port(s) of the PPVC.
=
You can specify a single ADSL port <1>, all ADSL ports <*> or
a list of ADSL ports <1,3,5>. You can also include a range of
ports <1,5,6~10>.
The VPI of the PPVC.
=
The VCI of the PPVC. This PVC channel is for internal use. The
=
subscriber does not need to create this PVC.
The VPI of the individual PVC that you are adding to the PPVC.
=
The VPI setting can be 0 to 255.
The VCI of the individual PVC that you are adding to the
=
PPVC. The VCI setting can be 32 to 65535 with a VPI of 0 or 1
to 65535 if the VPI is not 0. The subscriber's device must create
this PVC.
Assign a VC profile to use for this channel's downstream traffic
=
shaping.
Assign a VC profile to use for policing this channel's upstream
=
traffic. The IES-1248 does not perform upstream traffic policing
if you do not specify an upstream VC profile.
The priority queue (0~7) to use for this PVCs traffic. 7 is the
=
highest priority.
IES-1248-71/73 User's Guide