Pppoa To Pppoe Status Screen; Figure 114 Pppoa To Pppoe Status; Table 64 Pppoa To Pppoe Status - ZyXEL Communications IES-1248-71 User Manual

Chapter 31 PPPoA to PPPoE

31.3 PPPoA to PPPoE Status Screen

Use this screen to look at the current status of each PPPoA to PPPoE conversion. To open this
screen, click Advanced Application, PPPoA to PPPoE, and then click an index number.

Figure 114 PPPoA to PPPoE Status

The following table describes the labels in this screen.

Table 64 PPPoA to PPPoE Status

LABEL
PPPoA to PPPoE
PVC
Session Status
Session State
Session ID
Session Uptime
AC Name
220
DESCRIPTION
Click PPPoA to PPPoE to open the screen where you can set up PPPoA-to-
PPPoE conversions on each port (see
This field displays the port number, VPI, and VCI of the PVC.
This field displays whether or not the current session is Up or Down.
This field displays the ID of the current session. It displays 0 if there is no
current session.
This field displays how long the current session has been up.
This field displays the hostname of the remote access concentrator if there are
two access concentrators (or BRAS) on the network or if you want to allow PAE
translation to the specified access concentrator.
Section 31.2 on page 217).
IES-1248-71/73 User's Guide