48.6 VLAN Disable
Syntax:
ras> switch vlan disable <vid>
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
48.6.1 VLAN Show Command
Syntax:
ras> switch vlan show <vlanlist>
where
<vlanlist>
This command shows information about the specified port's VLAN settings.
The following example shows the settings for all VIDs.
Figure 171 VLAN Show Command Example
ras> switch vlan show *
vid name
---- ---------------- ---------------------------------------------------
1 -
enabled
2 -
disabled
2000 -
enabled
IES-1248-71/73 User's Guide
Chapter 48 IEEE 802.1Q Tagged VLAN Commands
You can specify a single VID: <1>, all VIDs: <*>, a list of
=
VIDs: <1,3>, you can also include a range of VIDs: <1,5,6~10>.
F:fixed X:forbidden N:normal
123456789012345678901234567890123456789012345678 12
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FF
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UU
123456789012345678901234567890123456789012345678 12
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FF
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UU
123456789012345678901234567890123456789012345678 12
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FF
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UU
U:untag T:tag
327