Chapter 53 Firmware and Configuration File Maintenance
Figure 216 Configuration File Example
#### sysinfo
sys info hostname ""
sys info location ""
sys info contact ""
#### snmp
sys snmp getcommunity public
sys snmp setcommunity public
sys snmp trapcommunity public
sys snmp trustedhost 0.0.0.0
sys snmp trapdst set 1 0.0.0.0 162
sys snmp trapdst set 2 0.0.0.0 162
sys snmp trapdst set 3 0.0.0.0 162
sys snmp trapdst set 4 0.0.0.0 162
#### server
sys server enable telnet
sys server enable ftp
sys server enable web
sys server enable icmp
sys server port telnet 23
sys server port ftp 21
--------------- Snip ------------------------------------------------------
-------------
The
sys user set admin
editor. Attempting to edit it and upload it to the IES-1248 will lock you out after
the system restarts. If this happens you will have to use the console port to
restore the default configuration file, and all of your configuration changes will
be lost.
53.3.3 Editable Configuration File Upload
You can upload the configuration file by following the steps below.
Use an FTP client to connect to the IES-1248.
Figure 217 Example: Use an FTP Client to Connect to the IES-1248
C:\> ftp <IES-1248 IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
Enter the management password (1234 by default).
Figure 218 Example: Enter the Management Password
Password: 1234
230 Logged in
360
command is encrypted and you cannot edit it in a text
IES-1248-71/73 User's Guide