Heli Mixer Detail; Free Mixers - GRAUPNER mz-32 HoTT Reference Manual

Graupner mz-32 Help Reference Manual
Tap on the reset icon to undo the current values to bring them back to default.
Tap on the Group icon to set the mix as global or flight phase dependent.
The Act column activates or de-activates the mix. If you want to enable the mix with a
control tap on the Ctrl column to bring up the input control dialog to assign the control.
F13S2
Tap on the name of the mixer in the Mixer (edit) column to edit the mixer name.
The edit toolbar will be displayed.
Tap on the edit icon (pencil) to edit the mixer name. The edit toolbar has also options to
delete (trash can) a mixer and change its sorting order (up and down arrow icons).
Tap on enter icon (check mark) to complete the changes.
Tap on the From field to select either the master channel or switch (Input Control).
Tapping on the field right of the mixer name field will toggle the setting between channel
(CH) and switch (SW).
The default is CH (channel). Selecting SW (control) will display the Select Input Control
dialog when tapping on the From field.
Tap on the To field to select the slave channel for the mixer.
Tap on the Detail icon to activate the mixer detail section.
F14S1

HELI MIXER DETAIL

In the Heli Mixer Detail menu, you can set the values
for the active mix.
The values in the fields Rate A and Rate B will
determine the amount of deflection for the active
channel in the mix.
To change the value of the mix, tap on the Rate A or
Rate B field to bring up the edit toolbar. You can use
the control bar for fast value entry or the arrow keys
for smoother entry input.
Tapping on the keychain icon will link both Rate A and
Rate B and control their values simultaneously.

FREE MIXERS

There are in total 16 available mixers available.
You can select from 3 different Curve types, 2 different
Spline types and 3 different Link types. A mixer can be
configured to be from a channel (master) to another
channel (slave) or from a switch (Input Control) to a
channel (slave).
Add a Free Mixer by tapping on the number in the No
column.
The edit toolbar will be displayed.
Tap on the + icon to add a mixer.
Page 24 of 42 Help-Ref-EN-V1.0