Quick Start Instructions - Pro Spot i5 Instruction Manual

Quick start instructions

i5
WARNING!
!
it is connected to the proper electricity by certified professionals. The water tank should be filled with a 50/50 water & antifreeze solution, and
make sure to properly secure all water hoses.
1
Weld Gun Check
Verify that hoses are secured in place.
a
Login
3
NOTE: The default user password is - 1234
5
Calibrate
* CAUTION!
No material between electrodes during calibration.
Calibrate:
• Every 100 welds
• Every arm exchange
• Every time auto mode is entered
All Info Copyright © Pro Spot International Inc.
Read this manual in it's entirety before attempting to weld with the i5 for the first time. Before turning the welder on, make sure
b
Verify that the weld-arm handle is
tightly screwed on.
Select a user to login.
Enter the password and
select the button
ü
Press the
CALIBRATE
button to calibrate the
weld gun.
2
System Checks and Power On
b Verify all 3-Phase lights are illuminated.
a
Verify the presence of air pressure.
a
Navigation
4
6
Weld
THE DISPLAY SHOWS:
b c
ON
OFF
c
Turn on the i5's
power.
Select the double sided
gun.
Press the trigger button on
the trans. gun to weld.
RESISTANCE INDICATOR
MEASURED THICKNESS
Page 3
5