i5
5) Double-Sided Welding
5.1 SA-0053 Double-Acting Spot Gun
5.1.1 SA-0053 Component Diagram
Welding Arm
Welding Cap
5.1.2 Using the Double-Acting Gun
Push this button to open electrodes wide.
All Info Copyright © Pro Spot International Inc.
34
The spot gun is used for the following weld programs:
• Two-Sided spot welding - HSS Galvanized steel, Mild steel, Weld Bonding,
Boron Steel, Pulse welding and OEM, Custom Modes
(see section 4.8 "Setting the default welding programs")
Release Trigger Switch
Tool Balancer Hook
Shank
Figure 5.1 SA-0053 Spot Gun - Component Diagram
5 - Double-Sided Welding
Weld Trigger Switch
Clamping Handle
Push this button to close electrodes and weld.
Cable / Tube Input
Page 17