Pro Spot i5 Instruction Manual page 20

i5
4.2.3 i5 Touch Screen Control
Two-Sided Auto Welding
Auto Mode on the i5 is able to automatically detect the thickness and resistance of most
metals and coatings / adhesives. Once properly calibrated the user only needs to press
the weld trigger and allow the i5 to determine the correct power levels and duration.
The user can also use Measurment Only Mode within the Auto Mode screen which mea-
sures the steel thickness and resistance without welding.
Home
IMPORTANT! Turn the power off before disconnecting water hoses from the weld gun.
IMPORTANT! Make sure the water cooling hoses are securely clipped into place before welding.
!
IMPORTANT! The i5 welder comes without coolant to ease transportation, be sure to fill coolant tank before
turning on the welder!
IMPORTANT! If the thermal breaker has switched off the welder, please contact Pro Spot's authorized service personnel
IMPORTANT! N'éteignez pas le soudeur pendant que le système de refroidissement est activé!
IMPORTANT! Si le disjoncteur thermique a éteint le soudeur, s'il vousplaît contactez personnel de service autorisé Pro Spot.
All Info Copyright © Pro Spot International Inc.
20
Weld Mode Calibration
Carousel
(Press to switch
between weld
modes.)
4 - Operation
Measurement Advanced
Only Mode Settings
Login Status
Trans Gun
Temperature
Auto
Thickness /
Resistance
Indicators
Help
Page 14