Pro Spot i5 Instruction Manual page 29

i5
4.2.3 i5 Touch Screen Control
3. Choose Your Advanced Settings
Press the settings button to go to advanced settings.
Set the desired parameters by selecting each one to be edited and
modify using the keypad that opens.
Squeeze
Time
Amount of time between pressure
and the initial pulse being applied.
Hold
Time
Amount of time pressure is applied
after the weld is complete.
Weld
Delay
Amount of time between pulses.
All Info Copyright © Pro Spot International Inc.
If you selected "Single Weld" on the main screen you are
Squeeze
Time
Amount of time between pressure
and current being applied.
Hold
Time
Amount of time pressure is applied
after the weld is complete.
If you selected "Double Weld" on the main screen you are
Rise
Time
Amount of time it takes for the
current to reach its peak during the
first pulse.
Fall
Time
Amount of time it takes for the
current to go from its peak to 0
during the first pulse.
4 - Operation
presented with these options.
Rise
Time
Amount of time it takes for the
current to reach its peak.
Fall
Time
Amount of time it takes for the
current to go from its peak to 0.
presented with these options.
Rise
Time (2)
Amount of time current is applied
during the weld during the
Fall
Time (2)
Amount of time current is applied
during the weld during the
second pulse.
second pulse.
Continued on next page >
Page 14
29