Pro Spot i5 Instruction Manual page 18

i5
4.2.3 i5 Touch Screen Control
Global Settings
Weld Log Setup
The Weld Log Setup screen allows you create work orders which are jobs specific to a
single car that is being worked on.
Select the green check mark that is next to
the work order that is currently being worked
on. Press the work order button in order to
change it's specifics.
Pressing the eyeglass icon will bring up the
weld log screen. This will show the last weld
made by default. All of the welds can be
viewed by navigating with the up and down
arrows.
All Info Copyright © Pro Spot International Inc.
18
When a work order button is pressed you
are presented with several fields to fill with
information regarding the car being worked
on. This will show up in the header of the
job print out.
Use the log navigation button to
enter a specific weld number.
4 - Operation
Press the disc icon to save your
changes.
300
Page 12