Pro Spot i5 Instruction Manual page 22

i5
4.2.3 i5 Touch Screen Control
2-Sided Welding (Semi-Auto Mode)
Semi-Auto Mode gives the user a high level of customizability that is based on the ma-
terials being welded rather than specific time and current settings. The user can select
either a predetermined weld setting (out of 16 common metal/coating/surface condition
combinations) or create a custom stack between 2-5 pieces of metal with industry stan-
dard coatings, surface conditions and material thicknesses.
Tip
Selection
Home
All Info Copyright © Pro Spot International Inc.
22
Weld Mode
Carousel
(Press to switch
between weld
modes.)
The navigation bar helps to visually establish
which weld program is currently selected.
Save
Program
Use the left and right
arrows to navigate
through the different
weld programs.
The weld program that is currently
selected will be represented visually.
Each colored stack represents a piece
of metal in the stack and the lines in
between each piece of metal repre-
sents the surface condition.
4 - Operation
Login Status
Trans Gun
Temperature
Time and Date
Stack Size
(Highligted is
the Currently
Selected Size)
Advanced Help
Settings
Page 14