Extension Arms; Switching To Extension Arms; Double-Sided Welding - Pro Spot i5 Instruction Manual

i5

5.2 Extension Arms

Figure 5.2 i5 Extension Arms
PSW-52
Wheelhouse Arm

5.2.1 Switching to extension arms

Turn off the welder's power,Loosen the handle,
and unclip water hoses and pull off the C-arm...
All Info Copyright © Pro Spot International Inc.
The Pro Spot i5 comes with a variety of extension arms to accomodate most
welding job situations.
Please refer to fig. 5.3 for details on what welding electrodes to use with each
extension arm.
NOTE: Extension arms marked "optional" are available from your local
distributor or online at www.prospot.com
REMARQUE: bras d'extension portant la mention «facultatif» sont
disponibles à partir de votre Distributeur régional ou en ligne à
www.prospot.com
PSW-302 C-Arm
1
2
3
Make sure to properly secure all water hoses before welding.
Turn off the welder before disconnecting water lines.

5 - Double-Sided Welding

PSW-305
508mm Extension Arm
Now, insert the extension arm, insert water hoses
and tighten the handle.
Page 18
35