Pro Spot i5 Instruction Manual page 27

i5
4.2.3 i5 Touch Screen Control
2-Sided Welding (Manual Mode)
Custom Weld Programs:
Creating a Custom Weld
1. Select the Weld Type and Cap
Press the weld cap selection button on the main Manual
Mode screen, then select the apropriate weld cap.
Select one of the 3 weld types in the Main Manual Mode Screen.
Single Weld
A single weld.
Then select a weld program to over-write.
All Info Copyright © Pro Spot International Inc.
The advanced settings screen (which is accessed with
the settings button from the Main Manual Mode screen)
allows the user to make a custom weld program. Once
the changes are accepted they will be reflected by the
weld settings display on the main Manual Mode screen.
PS-025
Weld Cap
PS-026
Flat 1/2" Cap
PS-027
OEM Cap
Double Weld
Two consecutive
current pulses.
4 - Operation
Pulse Weld
3-9 consecutive
current pulses.
Continued on next page >
Page 14
27