Introduction - Pro Spot i5 Instruction Manual

i5

1) Introduction

Team Pro Spot looks forward to supporting you.
You have a welder and support group that will increase your productivity. The integrated features, ease of use,
speed and quality welds that your i5 offers will become an important part of your business.
The following information will be needed when you call Pro Spot:
* MODEL TYPE: i5
* SERIAL NO:________________
The serial number is located on the back of the unit.
For parts or service contact your local distributor,
Local number: ____________________________
or in the U.S. call: Toll free:1-877 PRO SPOT or 1-760-407-1414
for a customer service representative.
Visit Pro Spot On-Line: www.prospot.com E-mail: info@prospot.com
NOTE: You can now order parts online at: prospot.com/store/
The i5 Spot welder is used by body shops to duplicate
the welding procedure used by the car manufacturers.
Use of the equipment that is contrary to the instructions
in this manual can cause personal injury and/or
machine damage.
Pro Spot International, Inc. can in no way be held
responsible for intentional or unintentional damage, and
consequent unlimited loss of profit, loss of income, loss
of business opportunity, loss of use, etc. that originates
from incorrect use of this equipment or its use in a man-
ner not intended.
Warranty
Pro Spot International, Inc. offers a limited two-year
guarantee from the date of delivery of the new welder.
This guarantee covers material defects and assumes
normal care and maintenance.
The guarantee assumes that:
• the equipment is correctly installed and inspected
• the equipment has not been altered or rebuilt without
approval from Pro Spot International, Inc.
• genuine Pro Spot International, Inc. spare parts are
used to make repairs.
• operation and maintenance has been carried out
according to the instructions in this manual.
All claims on warranty must verify that the fault has
occurred within the guarantee period, and that the unit
has been used within its operating range as stated in
the specifications. All claims must include the product
type and serial number. This data is stamped on the
name plate.
All Info Copyright © Pro Spot International Inc.
6
Congratulations on acquiring your new PRO SPOT i5 welder!
1 - Introduction
Note: This instruction manual provides advice as well
as instructions for installation, operation, maintenance
and troubleshooting.
IMPORTANT! Read this manual carefully to
become familiar with the proper operation of
the welder. Do not neglect to do this as
improper handling may result in personal
injury and damage to the equipment.
IMPORTANT! Lisez ce Mode d'Emploi
attentivement afin de vous familiariser avec
le bon fonctionnement du soudeur. Ne
négligez pas de le faire puisque une mau-
vaise manipulation peut conduire aux
blessures et dommages à l'équipement.
The drawings in this manual are presented for illustra-
tive purposes only and do not necessarily show the
design of the equipment available on the market at any
given time. The equipment is intended for use in accor-
dance with current trade practice and appropriate safety
regulations. The equipment illustrated in the manual
may be changed without prior notice.
The contents in this publication can be changed without
prior notice.
This publication contains information that is protected by
copyright laws. No part of this publication may be repro-
duced, stored in a system for information retrieval or be
transmitted in any form, in any manner, without
Pro Spot International, Inc.'s written consent.
Conformity with directives and standards:
i5 complies with CE standards.
Page 4