High / Low Limit Comparison Mode - Unipulse F320 Operation Manual

6.SETTING OF FUNCTIONS

6-2. High / Low Limit Comparison Mode

45
Setting of High / Low Limit Comparison Mode
Select setting mode 1.
1)
＋ －
FNC
Select high / low limit comparison mode.
2)
Press three times.
CAL
HOLD
Use and
GAIN
Comparison Mode,
then use key to validate the setting.
HOLD
To return to the indicated value display, press
Except for Mode 0 （Comparison is always made） of the High / Low
Limit Comparison Mode, setting is closely related to Near Zero and
Motion Detect functions. For details, see Near Zero on page 50 and
Motion Detect on page 53 .
High / Low Limit
Comparison Mode
3 : Comparison is made at stable
status except for near zero.
2 : Comparison is always made
except for near zero
1 : Comparison is made in the
stabl status.
0 : Comparison is always made.
keys to set the high / low Limit
CAL
＋ －
key.
FNC