* Front Three-point Hitch
It is used for attachment of front mounted implements and
tools with hitch points of category I according to ISO.
Note: The required width of the front hydraulic arms can be adjusted to a certain extent by
adjusting the end points.
More information in the Operatorʼs manual of the front three-point hitch manufacturer.
Controlling front three-point hitch
The hitch is equipped with two hydraulic cylinders.
Lifting and lowering is performed by the joystick lever
located on the right side of the driver's seat.
1 - Lifting of Front Three-Point Hitch Arms
2 - Lowering of Front Three-Point Hitch Arms
3, 4 - Oil pressure release to the quick couplers of the
SCV located on the front three-point hitch
5 - Joystick lever is locked
6 - Joystick lever is unlocked
The button on the joystick head is not functional in this
case.
After lowering or lifting the front three-point hitch arms to the required position, lock the
joystick lever with the lock (5) to prevent it from moving when accidentally leaning against the
joystick lever.
Front Fenders
The front fenders can be fitted to the tractor as an option. It may be compulsory to fit them with regard to the
relevant country's regulatory requirements.
64
TRACTOR CONTROLS
UCL18NN005
UCL18N036