Table of Contents
Advertisement
Front three-point hitch - standard version of the tractor
Front three-point hitch is controlled with a control ( IV ). In (N) position, front three-point hitch is blocked
against dropping.
Due to switchboard looseness there can be a drop of front three-point hitch.
By moving the control ( IV ) from ( N ) position backward, there is a heave of front three-point hitch arms. Do
not use locked position at the end of the control track ( B ).
By moving the control from ( N ) position to the front, there is lowering the arms of the three-point hitch. After
overcoming the increased resistance, control can be shifted to floating position ( A ), where the control is
locked.
Three-point hitch control can be switched to the mode of controlling front three-point hitch by means of
a joystick. The switch is done by switching the switch ( a ), which is equipped with a lock against undesired
pressing.
Switch switching (a) is not signalized. The buttons on the upper part of the joystick are not
functional. The control (IV) is not functional in the controlling front three-point hitch mode.
Controlling front three-point hitch mode - tractor version with auxiliary switchboard for front
hydraulic circuits
Front three-point hitch is controlled only by a joystick. Turning on the control of the front three-point hitch is
done by switching a switch (a), which is equipped with a latch against undesired pressing.
Switching the switch (a) is not signalized. The buttons on the upper part of the joystick are not
functional.
By moving the joystick from ( N ) position backward, there is the lift of arms of front three-point hitch. Do not
use the locked position at the end of the control track ( B ).
By moving the joystick from ( N ) position to the front, there is lowering the arms of front three-point hitch.
After overcoming the increased resistance, the control can be shifted to floating position ( A ), in which the
control is locked.
HITCHES
FHD14N082
FHD14N081
109
109
Advertisement
Table of Contents
