Main Gear Shift And Reverse Lever - Zetor COMPAX CL Series Operator's Manual

Main Gear Shift and Reverse Lever

The gear shift and reverse lever is located on the right side of the driver's seat.
The gear shift lever allows three forward speeds: 1, 2 and 3, N (neutral) and one reverse speed R.
This lever must be used when the clutch is fully depressed, both when the tractor is stationary and when it is
in motion.
1 - Main Gear Shift and Reverse Lever
2 - Scheme of Gear Shifting and Reversing
Important: Avoid damage! Avoid damage to the transmission.
1. Depress the clutch pedal and stop the machine completely before moving the main gear shift
and reverse lever (travel direction change).
2. When operating the machine, always depress the clutch pedal before changing the driving
speed.
3. Never lean your foot on the clutch pedal when the machine is in motion.
Warning:
Only move the main gear shift and reverse lever when you are sitting in the operator's seat.

Always stop the tractor.
Always stop the tractor before you leave it.

The gear shift lever must be in NEUTRAL when starting the engine.

CONTROLS, INSTRUMENTS & OPERATIONS
47