Bluetooth Test - ZOLL M Series Service Manual

M Series Service Manual

24.0 Bluetooth Test

Tools Needed: USB Bluetooth dongle with driver CD. Bluetooth application software BlueSoleil.
Test Setup:
Verify that the M Series unit is configured as follows: Bluetooth -- INSTALLED; Bluetooth Baud Rate -- 115200.
Do this...
24.1 Power up the M Series unit while pressing in
and holding the left-most softkey.
24.2 Insert a PCMCIA card containing data into the
card reader.
24.3 Press the UPLOAD CARD softkey, then press
the softkey UPLOAD CARD.
24.4 Press the SEND softkey.
24.5 Double click on the HyperTerminal shortcut
(BT115200) from the desktop.
Note: If setting up Hyperterminal for the first
time set COM PORT programmed for
Bluetooth adapter, 115200bps, 8, N, 1, N
24.6 Start Bluetooth Utility software (Blue Soleil) on
the computer.
24.7 In the IVT Corporation Blue Soleil window under
"View", select refresh devices.
24.8 Find the unit under test Serial Number and
double click on it.
1-48
Verify that...
The M Series unit displays the System Utilities Menu.
Verify that the Bluetooth LED is on and displays a green light.
Pass/Fail
o o o
o o o
9650-0450-01 Rev. U