Required Equipment; Safety Precautions - ZOLL M Series Service Manual

M Series Service Manual
"NIBP Assembly Removal" on page 5-37
"NIBP/IBP/Temp Assembly Removal" on page 5-40

Required Equipment

#1 Philips head screwdriver
•
#2 Philips head screwdriver
•
Wooden stick
•
Needlenose pliers
•
Wire Cutters
•
Exacto Knife
•
1/2" Nut Driver
•

Safety Precautions

Warning! SHOCK HAZARD!
Caution TAKE THE NECESSARY PRECAUTIONS TO GUARD AGAINST SHOCK OR INJURY BEFORE YOU CONDUCT
DEFIBRILLATOR TESTS OR REPAIRS.
Only properly trained technicians should service the unit.
•
The unit can contain deadly voltages even if the unit is turned off.
•
Make sure to discharge the unit before working with it.
•
Make sure you take the necessary precautions when working with static sensitive units. For example, you must wear a conductive wrist strap (which
•
touches your skin) connected to a grounding mat and to the earth ground. You must remove the wrist strap when you discharge high voltage or when
you are working on energized equipment.
Wear gloves to prevent skin oils from affecting the equipment.
•
5-2 9650-0450-01 Rev. U