ZS9-2 Electrical Specifications
The ZS9-2 controller has two hot-swappable rear accessible power supplies with N+N
redundancy. To understand the overall power consumption, see Oracle's online power calculator
at http://www.oracle.com/goto/powercalculators.
Parameter
Nominal input frequencies
Operating input voltage range
Rated input current
Maximum power consumption of controller
Maximum heat output of controller
ZS9-2 Acoustic Noise Emissions
The workplace-dependent noise level of this product is 9.5 Bels A-weighted Operating, and 8.0
Bels A-weighted Idling (measured Sound Power).
ZS9-2 Configuration Options
The ZS9-2 high-end model incorporates one or two controllers and one to forty-eight disk
shelves. Each controller has 10 PCle Gen3 slots in the rear, and 12 3.5" disk slots in the front,
two of which are occupied by system disks. The remaining ten front disk slots have permanent
filler panels. The following table describes the configuration options.
CPU
Memory
2x32-core, 2.6 GHz
2.0 TB
The ZS9-2 mid-range model incorporates one or two controllers and one to twenty-four disk
shelves. Each controller has 10 PCle Gen3 slots in the rear, and 12 3.5" disk slots in the front,
AC Power Supplies
50/60 Hz
100-240 VAC
10 A @ 100 to 127 VAC, and 7 A @ 200 to 240 VAC
Refer to the
Power Calculator (https://www.oracle.
com/goto/powercalculators)
Storage ZS9-2 for Watt calculations
Refer to the
Power Calculator (https://www.oracle.
com/goto/powercalculators)
Storage ZS9-2 for BTU/hr calculations
System Disks
PCIe Slots
2x3.5'' NVMe
Five dedicated; five
available
Installation Prerequisites and Hardware Overviews
Overview of ZS9-2 Controller
and see Oracle ZFS
and see Oracle ZFS
HBA
4-port (4x4) SAS-3
12 Gb/s external
45