Table of Contents
Advertisement
If later removing the CMA, be sure to support it as you remove the connectors.
■
Insert the CMA mounting bracket connector (1) into the right slide rail (2) until
1.
the connector locks into place with an audible click.
Insert the right CMA slide-rail connector (1) into the right slide-rail assembly (2)
2.
until the connector locks into place with an audible click.
3.
Insert the left CMA slide-rail connector into the left slide-rail assembly until the
connector locks into place with an audible click.
Installing a ZS5-4 Cable Management Arm
Installing a ZS5-4 Controller
153
Advertisement
Table of Contents
