Table of Contents
Advertisement
Installing a ZS7-2 Cable Management Arm
until the slide-rail locks (on the front of the mounting brackets) engage the slide-
rail assemblies (3).
Caution -
are engaged with the mounting brackets before continuing, or equipment damage or possibly
injury could occur.
Installing a ZS7-2 Cable Management Arm
Use the following procedure to install the cable management arm (CMA) for a ZS7-2 controller.
The CMA is an assembly that you can use to route the controller cables in the rack. This
procedure is completed from the back of the rack.
To prepare for installing the optional cable management arm (CMA), follow these guidelines:
Before You Begin
Route cables in the following priority until the CMA is full:
■
1. Cluster cables
2. SAS active optical cables (AOCs)
136
Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021
Verify that the controller is securely mounted in the rack and that the slide-rail locks
Advertisement
Table of Contents
