Table of Contents
Advertisement
Configure Networking. Configure the appliance network interfaces. The first
network interface has been configured for you, using the settings you provided
at the serial console.
Subcommands that are valid in this context:
datalinks
devices
interfaces
help [topic]
show
abort
done
hostname:maintenance system setup net> devices show
Devices:
DEVICE UP
MAC
igb0 true
0:14:4f:8d:59:aa
igb1 false
0:14:4f:8d:59:ab
igb2 false
0:14:4f:8d:59:ac
igb3 false
0:14:4f:8d:59:ad
hostname:maintenance system setup net> datalinks show
Datalinks:
DATALINK CLASS
igb0 device
hostname:maintenance system setup net> interfaces show
Interfaces:
INTERFACE
STATE
CLASS
igb0
up
ip
hostname:maintenance system setup net> done
To create a management interface now, use the following steps as an example:
=> Manage datalinks
=> Manage devices
=> Manage interfaces
=> Get context-sensitive help. If [topic] is specified,
it must be one of "builtins", "commands", "general",
"help" or "script".
=> Show information pertinent to the current context
=> Abort this task (potentially resulting in a
misconfigured system)
=> Finish operating on "net"
SPEED
1000 Mbit/s
0 Mbit/s
0 Mbit/s
0 Mbit/s
LINKS
LABEL
igb0
Untitled Datalink
LINKS
ADDRS
igb0
192.168.2.80/22
Performing Initial Configuration (CLI)
LABEL
Untitled Interface
Configuring the Appliance for the First Time
257
Advertisement
Table of Contents
