Connecting Cluster Cables
ZS7-2 Cluster Cabling
Three Category 5 Ethernet cables are provided: one green, one yellow, and one black. Each
cable is 2.5 meters in length.
Connect either the green cable or the yellow cable from serial port 0 of one controller to
■
serial port 1 of the other controller.
Connect either the green cable or the yellow cable from serial port 1 of one controller to
■
serial port 0 of the other controller.
Connect the black cable between the Ethernet ports of each controller.
■
The following figure shows cluster cabling between two ZS7-2 controllers (high-end model
shown).
FIGURE 49
ZS5-x Cluster Cabling
Three Category 5 Ethernet cables are provided. Each cable is 2.5 meters in length.
Connect one cable from serial port 0 of one controller to serial port 1 of the other controller.
■
Connect the second cable from serial port 1 of one controller to serial port 0 of the other
■
controller.
Connect the third cable between the Ethernet ports of each controller.
■
The following figure shows cluster cabling between two ZS5-4 controllers.
222
Oracle ZFS Storage Appliance Installation Guide, Release OS8.8.x • August 2021
ZS7-2 Controller Cluster Cabling
Need help?
Do you have a question about the ZFS and is the answer not in the manual?